Invalid Log Info - Xerox DocuColor 2240 Service Manual

116-330 HDD File System
The system detected that the an error has occurred or the HDD was not formatted during HDD
check at power on.
Procedure
Switch power off then on. The problem continues.
Y N
Return to service call procedures.
Run the HDD Diag (ADJ 9.8).
If the problem continues, replace the HDD
If the problem continues, replace the ESS PWB
Status Indicator RAPs
116-330, 116-332
(PL 13.1).
(PL 13.1).

116-332 Invalid Log Info

A failure related to log was detected.
Procedure
Switch power off then on. The problem continues.
Y N
Return to service call procedures.
Go to GP 3 and perform the Log Initialization portion of the routine.
If the problem continues, run the HDD Diag
If the problem continues, switch off the power and disconnect the HDD. Switch on the power. If
the original fault code (116-332) is now gone, replace the HDD. If the code is still present,
replace the ESS PWB (PL 13.1).
09/03
2-652
(ADJ 9.8).
Initial issue
DC 3535/2240/1632, WC M24