Rep 9.22 Transfer Belt - Xerox DocuColor 2240 Service Manual

REP 9.22 Transfer Belt

Parts List on PL 5.3
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
Cover Transfer Belt in a black bag.
NOTE: Keep your hand off Transfer Belt.
1. Remove IBT Belt Assembly (REP 9.15).
2. Remove IBT Cleaner Assembly (REP
3. Remove Stand Plate (Figure 1).
a. Remove screw (2).
b. Remove Stand Plate in direction of arrow. Stand Plate will be installed in new loca-
tion in step 7.
1
Remove
Screws (2)
Figure 1 Removing Stand Plate
Initial issue
DC 3535/2240/1632, WC M24
WARNING
CAUTION
9.16).
2
Move Stand Plate in direc-
tion shown to remove it
4. Remove Handle (Figure 2).
Figure 2 Removing Handle
5. Remove screws on both sides
Figure 3 Removing Screws (both sides)
09/03
4-91
(Figure 3).
1
Remove
Screw
2
Remove Screw
from same position,
other side
Repairs and Adjustments
REP 9.22