Outline Of Drypro 771 Settings - Konica Minolta DRYPRO 771 Installaton Manual

Ch.3 Settings
3.1

Outline of DRYPRO 771 Settings

The following network and printing parameter settings may be made using the service maintenance mode.
Service Maintenance Mode
• S00 DICOM SCP
• S10 DICOM SCU
• S20 PRINT CONDITION : Print parameter settings for each of the diagnostic devices connected to the DRYPRO 771.
• S30 DICOM PRIORITY : DICOM data enabling/disabling settings.
• S40 FILM SETUP
• S70 SYSTEM SETUP
• SG0 SCHEDULE
User Maintenance Mode
• U30 PRINT CONDITION : Setting of print condition for each diagnostic device connected to the DRYPRO 771.
• U50 USER LUT
• U60 LUT LIBRARY
• UA0 TIME SET
The setting of the DRYPRO 771 can also be implemented using the maintenance
tool. Refer to the Service Manual for details.
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
: DICOM information settings for the DRYPRO 771.
: Registration of diagnostic devices connected to the DRYPRO 771 and DICOM information,
N-EVENT REPORT settings for those devices.
: Setting of output film size, film type, etc., used with the DRYPRO 771.
: Setting of internal operation of the system of the DRYPRO 771.
: Resetting the regular maintenance schedule of the DRYPRO 771.
(about parameters affecting the image quality, etc.)
: Editing the user LUT. (refer to the outline of the LUT setting)
: Setting LUT for each channel of the DRYPRO 771 by applying the LUT in LUT library.
: Check and setting of the internal clock of the DRYPRO 771.
< 54 >