Checking The Accessories - Konica Minolta DRYPRO 771 Installaton Manual

Ch.2 Unpacking and Installation
2.3

Checking the Accessories

The following parts are packed together with the DRYPRO 771. Check that all the parts listed below are
present. Should any parts be missing, the unit should be treated as an erroneous consignment.
Name of Accessories
Warranty
Inspection sheet
Operation manual
Operation sheet
Attached document for doctors
Deodorant filter
Deodorant filter case
Suction cups
Power supply cable
Cutter
Clamp
Exhaust duct
One-touch Spacers
Accessory list
Protective parts(red) collection bag
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
pcs Remarks
x1 Make sure to directly hand over the documents to the user.
x1 Make sure to directly hand over the documents to the user.
x1 Make sure to directly hand over the documents to the user.
x1 Make sure to directly hand over the documents to the user.
x1 Make sure to directly hand over the documents to the user.
x1 Install the parts when the system is installed.
x1 Install the parts when the system is installed.
x1 For film pick up at the supply unit. (spare)
x1 To supply the electric power
x1 To cut the edge of film package when it is loaded.
x2
x1 To change the exhaust direction and/or to reduce the exhaust noise (option)
x2 To protect the network cable (option)
x1
x1 To collect and bring back the protective parts resulted from installation.
< 30 >
Refer to