Konica Minolta DRYPRO 771 Installaton Manual page 46

Ch.2 Unpacking and Installation
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
6
Set the deodorant filter in the deodorant filter
case.
• Insert the filter assembly deeply into the filter case
with holes on the corrugated cardboard facing up
as shown in the figure.
7
Turn lever-A down to the right.
8
Close the front cover.
• Close the front cover, and make sure it is locked.
• Implementing the above procedures will complete
the setting of deodorant filter.
• It is necessary to change the film size of the tray in
the case that the film other than 14x17in is used.
Proceed to the "2.5.4 Installing the UPS" if the
14x17in is only the film size used on the DRYPRO
771, because the size change is not necessary.
< 44 >
p.45 Changing Supply
Tray Film Size