Konica Minolta DRYPRO 771 Installaton Manual page 23

Ch.1 Before Installation
15) [shift] Key
To input lower-case alphabetical
characters, this key should be be
continuously depressed when inputting.
16) Ten-keypad
Allows input of numerical values or
alphabet characters.
When used for alphabetical input,
keeping the [shift] key depressed while
using the keys will produce lower-case
character input. Use of the ten-keypad
without the [shift] key will result in upper-
case character input.
Under normal use by user, "0-9 Lamp", "A-Z Lamp", [mode] key, [shift] key, "Ten-
Keypad" and [del/BS] key are concealed by service maintenance key cover. Detach this
cover when required in installation, maintenance and service work. However, make sure
that the cover is put back when the user operates the DRYPRO 771.
Slightly push towards the message display window, and lift to remove the cover.
Message Display Window
14x17 B S:076 Q:000.
READY
Status Loaded Film Info.
• Loaded Film Info.
Displays the type, size, remaining
sheets of the film loaded in the
supply tray.
Size Film Type
14x17~ B(SD-P)
14x14 C(SD-PC)
11x14 DB(DR-P)
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
17) [del/BS] Key
Used for deletion of single digits or
alphabet characters.
Service Maintenance Key Cover
Print Queue
• Print Queue (Q : )
Displays the copy count waiting for
print out.
• Status
Sheets (S : )
Displays the status of DRYPRO 771.
0 ~ 125
READY
PRINTING
WARM UP
FILM EMPTY!! : Film in tray is empty
: Ready for print
: Printing
: Warming up
< 21 >
When a column in
which numerical input
only is allowed is
selected, use of the
ten-keypad will produce
automatic input of
numerical values only.