Konica Minolta DRYPRO 771 Installaton Manual page 87

Ch.4 Checking the Image Quality
S62 COPY COUNT .
[01]
Print test pattern?.
YES
S60 TEST PRINT /.
FLAT PATTERN
S61 FLAT BASE .
[150]x0.01D
S62 COPY COUNT .
[01]
Print test pattern?.
YES
S60 TEST PRINT /.
FLAT PATTERN
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
8
Input the copy count using the ten key, and
press the [enter] key.
• Input "1" at the installation.
• Print queue will be registered, and the screen
returns to the maintenance menu screen.
• The registered print queue will be automatically
printed when exiting the service mode.
• When [exit] key is pressed, a confirmation screen
will be displayed, and prompts to select "YES" or
"NO" with the [select] key for registration of the
settings.
Print test pattern?.
Selecting "YES" will register the print queue, and
the screen returns to the maintenance menu
screen.
Selecting "NO" will return to the maintenance
menu screen without registering the print queue.
9
5 8
Repeat step ~
for the flat pattern of D= 1.50.
• Input "150" on the density select screen, the one
7
invoked in step .
(150x0.01=1.50)
• Select "1" for the copy count.
• Proceed with the print queue registration of
SMPTE pattern.
< 85 >
YES
to register the print queue
Only selecting "YES" to
register the print queue
will not initiate printing.
It is necessary to exit
the service
maintenance mode to
initiate printing.