Konica Minolta DRYPRO 771 Installaton Manual page 62

Ch.3 Settings
• S1B FRAME LAYOUT
• S1C DMAX/DMIN
• S1D P-VALUE RCV
Relation among Status of the DRYPRO 771, "DICOM ERR LV" setting and communication with external
devices.
Ready for print • warming up
(including the case where "S19 EMPTY NOTICE" is set to "OFF" and film empty.
DICOM ERR LV
STANDARD
FAILURE
N-ACTION
In User or Service Maintenance Mode
DICOM ERR LV
STANDARD
FAILURE
N-ACTION
Film Empty (S19 EMPTY NOTICE is set to "ON")
DICOM ERR LV
STANDARD
FAILURE
N-ACTION
In Error Status
DICOM ERR LV
STANDARD
FAILURE
N-ACTION
note 2 : Queue registration is available when output under "WARNING" is set to be allowed on the external diagnostic device.
note 3 : Forcefully interrupt the DICOM connection using the print command (N-ACTION).
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
: Sets the spacing between frames in multi-format output.
"EVEN"(even layout) "CENTER" (centered layout), "H EVEN" (even layout, Hitachi
format) or "H CENTER" (centered layout, Hitachi format) may be selected.
default setting : EVEN
"EVEN" : Film is printed with the top/bottom/left/right margins unchanged
and the spaces between frames as wide as possible. (Even
layout)
"CENTER" : Film is printed with the spaces between frames uniform and the
top/bottom/left/right margins broadened. (Centered layout)
"H EVEN" : Selected to produce even layout when a Hitachi diagnostic
device is connected.
"H CENTER" : Selected to produce centered layout when a Hitachi diagnostic
device is connected.
: This setting determines whether maximum and minimum densities will be printed
according to the DRYPRO 771 settings or the diagnostic device settings.
"DICOM" (diagnostic device) or "P-CON" (DRYPRO 771) may be selected.
default setting : DICOM
: Sets the tone conversion method of the image.
Select from "OFF" (as in the past) and "ON" (tone conversion using "P" value) .
default setting : OFF
DICOM Comm. Message
NORMAL
NORMAL
NORMAL
DICOM Comm. Message
FAILURE
FAILURE
NORMAL
DICOM Comm. Message
WARNING
FAILURE
NORMAL
DICOM Comm. Message
FAILURE
FAILURE
NORMAL
Status of DRYPRO 771
Queue Reg.
displayed on external device
A/V
A/V
A/V
Status of DRYPRO 771
Queue Reg.
displayed on external device
N/A
N/A
A/V
Status of DRYPRO 771
Queue Reg.
displayed on external device
note 2
N/A
note 3
Status of DRYPRO 771
Queue Reg.
displayed on external device
N/A
N/A
note 3
< 60 >
READY
READY
READY
ERROR
ERROR
READY
WARNING
ERROR
READY
ERROR
ERROR
READY