Part Name - Konica Minolta DRYPRO 771 Installaton Manual

Ch.1 Before Installation
1.4 Part Names
The names of the DRYPRO 771 parts relevant to installation are set out below.
Front, Top and Right Sides
1) Operation Panel
2) Front Cover
3) Supply Tray
9) Stand
1) Operation Panel
Used to carry out operational
procedures and make settings of
DRYPRO 771.
Additionally, messages are displayed on
this panel.
2) Front Cover
This cover may be opened to remove a
film when a jam occurs.
3) Supply Tray
Holds the film.
4) Film Ejection Tray
Printed film is ejected into this tray.
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
4) Film Ejection Tray
5) Air Intake
6) Right Cover
7) Front Cover
Unlock Cover
8) Power Breaker
5) Air Intake (2 locations)
Intakes air for internal cooling.
6) Right Cover
7) Front Cover Unlock Cover
Cover for the front cover unlock.
8) Power Breaker
Used for ON/OFF control of the main
power supply.
9) Stand
< 18 >