Konica Minolta DRYPRO 771 Installaton Manual page 70

Ch.3 Settings
(3) Applying the LUT in the LUT Library to each CH of the DRYPRO 771.
Applies the LUT in the library, which is prepared in advance or the User LUT to any of channel 1~7
through which the external device is affected by the LUT.
(same operation can be implemented using "web maintenance tool→SCU→LUT")
U60 LUT LIBRARY /.
CH 1 MRI-1
U61 LUT SELECT CH1/.
1 LINEAR
U62 LIB CT/MR .
CT&MR KC B
U60 LUT LIBRARY /.
CH 1 MRI-1
DRYPRO MODEL 771 INSTALLATION MANUAL Ver.1.00 2003.10
1
Start the maintenance mode.
2
Press [d] of the [menu/select] key six times.
• "U60 LUT LIBRARY" is displayed.
3
Select the diagnostic device, and press the
[enter] key.
• LUT Select screen will be displayed.
4
Use the [select] key [[][\] to choose the user
LUTs to be set and press the [enter] key.
• The name of the selected user LUT will be
displayed.
5
Press [menu/select] key [d][c] to select the
type of diagnostic device.
6
Use the [select] key [[][\] to choose from the
library the LUT to be applied.
7
Press [enter] key.
• The selected LUT is copied, and returns to the
maintenance menu screen.
< 68 >