Adjust The Inclination Of The Head/Carriage Unit - Brother DCPJ525W Service Manual

1.4

Adjust the inclination of the head/carriage unit

Before starting the operation below, be sure to set recording paper in the paper tray for printing
check patterns.
(1) Move the head/carriage unit to the adjustment position in the maintenance mode (Function
code 63), referring to
(2) Open the document scanner unit.
(3) Turn both the external and internal knobs of the inclination adjuster to the center position
with a spanner and a hexagonal wrench as shown below.
Center position
(4) Close the document scanner unit.
(5) Drag and drop the "incline_mini11.prn" onto the Brother Maintenance USB Printer driver
icon in the Filedrgs window.
The machine displays the "Receiving Data" on the LCD and prints out the head inclination
test pattern "CR-INCLINE EXIT adjust check" (see
Tip: The head inclination test pattern can also be printed with Function code 61 (refer to
Chapter 5, Section
before proceeding to the following step.
(6) On the test pattern, check the upper single row of blocks and select the block that is the
least uneven print.
Chapter 5, Section
1.4.19). After printing with a memory card, be sure to remove the card
4-7
1.4.20.
Internal knob
of the inclination adjuster
External knob
of the inclination adjuster
(head_position_2)
page 4-9 for a sample printout).
Confidential