Display Of The Equipment's Log (Function Code 80) (User-Accessible) - Brother DCPJ525W Service Manual

1.4.31 Display of the Equipment's Log (Function code 80) (User-accessible)

Function
The machine can display its log information on the LCD.
Operating Procedure
(1) Press the 8 and 0 keys in this order in the initial stage of the maintenance mode.
The calendar clock appears on the LCD.
(2) Press the Black Start (Mono Start) key to call up the following log information items on
the LCD, one by one.
Tip: Resetting the purge and flushing counts (Items in the shaded fields in the table
below)
When one of the log items in the shaded fields is displayed, pressing the 2, 7, 8, and 3 keys
in this order resets the displayed log information to zero.
00:00 00:00 OK
8CA***
COUNTRY:
SWITCH:
MAIN:
********
P****
B****
*1
S/N:
ALR****
CISF:
ENGINE:
PICTBRIDGE:
*3
DOT K:
*3
SEN K:
*3
PLA K:
*3
LK:
INK CH BK:
INK CH2 BK:
INK CH3 BK:
RTC backup check (not required for servicing)
Model code
Country code (See
Checksum of WSW, PSW, USW, and FSW (not required for servicing)
Version and production date of main firmware
Checksum of main firmware
Version and production date of sub firmware
Version and production date of boot firmware
Serial number of the machine
Head property code
CIS type (Function code 59)
Engine type (not required for servicing)
*2
PictBridge information
(Shown only on models supporting PictBridge/USB flash memory
drive)
Ink drop count, indicating how many droplets have been jetted out from
each of the current ink cartridges (including droplets used for purging)
Ink drop count after detection of "Ink Low," indicating how many
droplets have been jetted out from each of the current ink cartridges
after the ink remaining sensor detects "Ink Low."
Ink drop count, indicating how many droplets have been jetted out onto
the platen in borderless printing
Total ink drop count, indicating how many droplets the machine has
jetted out from each of the ink cartridges since produced
(excluding droplets used for purging)
*3
Ink cartridge change count (Standard-yield, color ink cartridge)
(The BK/YL/CY/MZ on the LCD indicate the slot positions in the ink
refill ASSY.)
*3
Ink cartridge change count (Standard-yield, black ink cartridge)
(The BK/YL/CY/MZ on the LCD indicate the slot positions in the ink
refill ASSY.)
*3
Ink cartridge change count (High-yield, color ink cartridge)
(The BK/YL/CY/MZ on the LCD indicate the slot positions in the ink
refill ASSY.)
Section 1.4.26 in this chapter.)
5-65
Confidential