If You Replace The Ink Absorber Box Or Flushing Box; Reset Each Of The Purge And Flushing Counts - Brother DCPJ525W Service Manual

4

IF YOU REPLACE THE INK ABSORBER BOX OR FLUSHING BOX

4.1

Reset each of the purge and flushing counts

(1) Switch the machine to the maintenance mode. (Refer to
(2) Press the 8 and 0 keys in this order.
(3) Press the Black Start (Mono Start) key several times until the purge (or flushing) count
appears on the LCD.
(4) Press the 2, 7, 8, and 3 keys in this order to reset the purge (or flushing) count.
(5) Press the Stop/Exit key to return to the initial stage of the maintenance mode.
(6) Press the 9 key twice to exit from the maintenance mode.
Tip: This machine counts all purge and flushing operations performed since produced in order
to prevent the ink absorber box and flushing box from overflowing with drained and flushed
ink, respectively. An initial purge, for example, advances the count by 537.
When the purge or flushing count approaches 10750 or 660336587, respectively, the
"MACHINE ERROR 46" appears and further purge or flushing operations are prohibited.
Replace the ink absorber box and flushing box, and then reset their counts using the procedure
above.
Chapter
4-29
5.)
Confidential