Update The Paper Feeding Correction Value (Function Code 58); Align Vertical Print Lines (Function Code 65); Adjust Margins In Borderless Printing (Function Code 66); Create Head Calibration Data And Write It Into Flash Rom (Function Code 02) - Brother DCPJ525W Service Manual

2.11 Update the paper feeding correction value (Function code 58)

Refer to Chapter 5, Section

2.12 Align vertical print lines (Function code 65)

Refer to Chapter 5, Section

2.13 Adjust margins in borderless printing (Function code 66)

Refer to Chapter 5, Section
2.14 Create head calibration data and write it into flash ROM (Function code
02)
Refer to Chapter 5, Section
If restoring head calibration data ends successfully in
required.
2.15 Print out an ADF copy chart and make a copy of that chart in ADF
scanning
Refer to Section

2.16 Print out a total quality check pattern

Refer to Section

2.17 Adjust the touch panel (Function code 78) (For models with touch panel)

Refer to Chapter 5, Section

2.18 Switch back to standby

Refer to Section
1.4.17.
1.4.21.
1.4.22.
1.4.2.
3.1.
1.10.
1.4.30.
1.11.
Section 2.6
4-25
above, this procedure is not
Confidential