Bank Assy And Base Pads On The Paper Tray Assy - Brother DCPJ525W Service Manual

9.19 Bank ASSY and Base Pads on the Paper Tray ASSY

(1) Pull the four lock arms on the rear of the paper tray ASSY outwards to release the four
latches of the bank ASSY, and separate the bank ASSY from the paper tray.
(2) If the base pad needs to be replaced, peel it off the bottom of the paper tray.
Note: Once removed, the base pad will become unusable and a new pad will have to be put
back in.
Latch
Bank ASSY
Bank ASSY
Paper tray Paper tray
Assembling Notes:
• When attaching a new base pad to the paper tray, align the front edge of the pad with that of
the depressed section on the paper tray and center the pad widthways as shown above.
• When mounting the bank ASSY, first insert the four pawls into the openings in the paper tray
and then press the inside of the bank ASSY to the rear so that the four latches snap into place.
Pawls Paper tray (placed upside down)
Lock arms
Latch
Lock arms
Depressed
Pawls
section
Base pad
3-115
Pawls
Latches
Base pad
Paper tray
Align the edge of the
base pad with the front edge
of the depressed section on the
paper tray.
Output paper tray cover
(3_109_E)
Confidential