Brother DCPJ525W Service Manual page 346

ADF scanning page count/Flat-bed scanning page count/ADF paper jam count/FAX
scanning count/Scanner count
Home positioning error code of the CIS unit/Home positioning detection log data (See
Function code 80. Refer to
Purge count/Wiper count/Flushing count
Purge count by purge type (automatic/manual)
eIP: Engine setup purge count
uIP: Initial purge count
RP: Periodical reset purge count
SRP: Small reset purge count
SP: Periodical suction purge count
RP2: Periodical vent purge count
CP: Ink cartridge replacement purge count
NP: Normal purge count
RP3: User reset purge count
PP: Power reset purge count
QPP: Power purge count
tFL: Periodical flushing count (only after color printing)
Total power-ON time
Machine error history (Error code : Date and time of occurrence : Machine temperature
at the time of occurrence)
Communications error history (Error code : Date and time of occurrence)
Initial purge log (FF: Normal end)
Machine information backup file version
Sensor status (See Function code 32 for sensor names.)
Ink cartridge type loaded in each slot
0: No cartridge loaded
1: Standard-yield, color ink cartridge
2: Standard-yield, black ink cartridge
3: High-yield color ink cartridge
4: High-yield black ink cartridge
*: Unidentifiable ink cartridge
Not required for servicing
Not required for servicing
Timing info and damage info when Error EC has occurred
T: Timing info
(0: No error, 1: Error at the start of operation, 2: Error during usual operation)
E: Expected value of information read
R: Damaged value of information read
Reset count*/Power-ON duration at the time of last reset
*
Excluding the resets triggered by the following
Function codes 01 and 91
Function code 80 (Resetting the purge and flushing counts)
Section 1.4.31 in this chapter.)
5-62
Confidential