Speaker*, Front Cover And Wireless Lan Pcb - Brother DCPJ525W Service Manual

9.9

Speaker*, Front Cover and Wireless LAN PCB

(1) Disconnect the speaker harness* from the main PCB and release it from the cable guides
provided on the upper cover.
(2) Pull out the speaker spring (wire spring)* and take the speaker* out of the pocket provided
on the upper cover.
Upper cover
Speaker *
Cable guide
Assembling Note: After mounting the speaker* and its spring* into the pocket provided on the
upper cover, route the speaker harness* through the cable guides on the upper cover as shown
above.
Speaker spring *
Speaker *
Cable guide
Speaker harness *
3-74
* For models with speaker
Main PCB
Main PCB
Upper cover
(3_069)
Confidential