Keys To Be Used In The Maintenance Mode - Brother DCPJ525W Service Manual

1.2.2 Keys to be Used in the Maintenance Mode

This chapter provides the operating procedure for base models, that is, models with numerical
keypad and without touch panel. For other models, see the table below.
Base models
Models with numerical keypad/
without touch panel
TIP: Using the >> and << keys on the touch panel switches the software keypads between the
numerical and function keypads.
Models with both numerical
keypad and touch panel
#, *, and 0 to 9
Black Start (Mono Start)
OK
Clear
(on touch panel)
(on touch panel)
Stop/Exit
Set (on touch panel)
CLR (on touch panel)
(on touch panel)
(on touch panel)
5-3
Models without numerical
keypad
#, *, and 0 to 9 (on touch
panel)
Confidential