Brother DCPJ525W Service Manual page 161

10
On the tube support plate and head/carriage unit: Ink supply tubes
Tube guides
(Rear)
Tube support plate
Note: Bind ink supply tubes with two tube clamps. As shown above, align four ink supply tubes
in the order of Magenta, Cyan, Yellow, and Black from bottom to up. Set tube clamp (1) on
magenta, cyan, and yellow ink tubes from the bottom, and tube clamp (2) on black, yellow, and
cyan ink tubes from the top.
Guide boss
Note: Make sure that all of the four ink supply tubes are routed in front of the guide boss as
shown above.
Lower cover
Bent section of tube support wire
Head/carriage unit
Ink supply tubes
3-24
Sponge
Cyan
Yellow Magenta
Head joint spring
(3_021)
Head joint
Tube clamp (1)
Tube clamp (2)
Black
Yellow
Cyan
Magenta
Black
(3_020)
Confidential