Brother DCPJ525W Service Manual page 212

(3) Remove the screw (that secures the front cover and upper cover together to the lower
cover).
(4) On the inside of the front cover, lightly pull up the retainer to release it from the boss on the
upper cover, slightly pull the front cover up and towards you to remove the front cover
together with the wireless LAN PCB.
(5) Disconnect the harness from the wireless LAN PCB.
Boss
Upper cover
(6) Release the latch on the front cover and remove the wireless LAN PCB.
Wireless LAN PCB
Hooks
Assembling Note: When mounting the front cover, route the wireless LAN PCB harness
through the upper opening provided in the lower cover, fit the two hooks into the lower
openings, and set the front cover into place while lifting it up slightly.
Taptite, bind B
M4x12
9
Latch
3-75
Retainer
Wireless LAN PCB harness
Front cover
Hooks
Front cover (3_071)
(3_070)
Confidential