Recording Paper Or Disc Tray Feeding Problems; Recording Paper Not Fed From Paper Tray (Error Code 18, 82, Etc.) - Brother DCPJ525W Service Manual

4.2

Recording Paper or Disc Tray Feeding Problems

Problems related to recording paper or disc tray feeding are end user recoverable by following
the User Check items. If the problem persists, follow each procedure in the order of the number
described in the Step column in the tables below.

4.2.1 Recording paper not fed from paper tray (Error code 18, 82, etc.)

User Check
- Check that recording paper is loaded correctly in the paper tray.
- Check that paper tray is set.
- Check that the jam clear cover is closed.
- Check that the recording paper weight is 64 to 120 g/m
- Check that the disc guide is closed.
- Clean the paper feed roller.
Step
1 ASF motor harness connection
failure
2 Registration actuator defective
3 Paper tray defective
4 CR encoder strip stained
5 Paper pull-in rollers worn out or
paper pull-in roller holder
defective
6 Registration sensor defective
7 ASF motor defective
8 Engine unit defective
9 Main PCB defective
Cause
Check the connection and reconnect the harness.
Check and reposition the registration actuator.
Replace the paper tray.
Replace the CR encoder strip.
Replace the paper pull-in roller holder ASSY.
Replace the registration sensor PCB ASSY.
Replace the ASF drive ASSY.
Replace the engine unit.
Replace the main PCB ASSY.
2-57
2
.
Solution
Confidential