Cannot Detect The Origin Of The Carriage. (Detected By The Cr Encoder Sensor); Capping Load Large - Brother DCPJ525W Service Manual

Error Code 31
Paper Jam / Disc Jam

Cannot detect the origin of the carriage. (Detected by the CR encoder sensor)

User Check
- Remove foreign materials.
Step
1 Foreign materials on the CR
timing belt or around the head/
carriage unit
2 Switching lever guide out of place Reposition the switching lever guide.
3 CR encoder strip stained
4 Switching lever guide defective
5 Maintenance unit defective
6 Main PCB defective
Error Code 32
Unable to Clean 32

Capping load large.

User Check
- Remove the jammed paper.
Step
1 Switching lever guide out of place Reposition the switching lever guide.
2 Leveler roller (LR) ASSY not
mounted correctly on the head/
carriage unit
3 Switching lever guide defective
4 Maintenance unit defective
Cause
Remove foreign materials.
Replace the CR encoder strip.
Replace the switching lever guide.
Clean the maintenance unit or replace it.
Replace the main PCB ASSY.
Cause
Set the LR ASSY into place, using the LR jigs (LR
positioning jig and LR fitting jig).
Replace the switching lever guide.
Clean the maintenance unit or replace it.
2-29
LCD
Solution
LCD
Solution
Confidential