Electrical connection
6.5 Additional system components
6.5.1.6
Assembling the 120 kW device
Image 6-15
● Release the 2 screws at the lower side of the device and remove the front panel
● Release the nuts
● Loosen the screws
● Remove the cover plate
● Push in the CBE20
● Tighten the screws
● Fasten the cover plate
● Screw on the bracket
● Re-attach the front panel and tighten the 2 screws at the lower side of the device
64
Assembling the 120 kW device
①
, remove the bracket
③
③
(screw)
④
③
again
③
③
Operating Instructions, 05/2016, A5E34382853K
SINAMICS DCP