The Starter Project Wizard - Siemens sinamics dcp Operating Instructions Manual

⇒ Close the "STARTER Getting Started Drive Commissioning" screen by selecting HTML
Help > Close.
Note
When you deactivate the Display wizard during start checkbox, the project wizard is no
longer displayed the next time you start STARTER.
You can bring up the project wizard by selecting Project > New with wizard.
To deactivate the online help for Getting Started, follow the instructions provided in the help.
You can call up the online help at any time by selecting Help > Getting Started.
STARTER features a detailed online help system.
7.3.2.3

The STARTER project wizard

Image 7-3
⇒ Click Arrange drive units offline... in the STARTER project wizard
SINAMICS DCP
Operating Instructions, 05/2016, A5E34382853K
7.3 Commissioning with the STARTER commissioning tool
STARTER project wizard
Commissioning
81