Standards And Certifications - Siemens sinamics dcp Operating Instructions Manual

Technical data
B.3 Standards and certifications
B.3

Standards and certifications

Relevant standards
EN 62109-1
EN 61800-5-1
EN 61800-3
EP standard
Certification
The product has a CE mark and an EC declaration of conformity as part of the low-voltage
directive (2006/95/EC) which defines the basic requirements for the safety of electrical
equipment.
The product is USR, CNR Recognized with UL Standard UL 61800-5-1 and CSA Standard
C22.2 No. 274-13.
The product has EAC and RCM certification.
290
Safety of inverters for use in photovoltaic power systems -
Part 1: General requirements
Adjustable speed electrical power drive systems -
Part 5-1: Requirements regarding safety, electrical, thermal and energy re-
quirements
Variable-speed electrical drives - EMC product standard including specific test
methods, second environment / category C3
Specifications on Environmentally Compatible Product and System Design
(previously SN 36350-1/2/3/5)
Operating Instructions, 05/2016, A5E34382853K
SINAMICS DCP