Runtime (Operating Hours Counter) - Siemens sinamics dcp Operating Instructions Manual

Operation

8.13 Runtime (operating hours counter)

8.13 Runtime (operating hours counter)
Total system runtime
The total system runtime is displayed in r2114 (Control Unit).
● Index 0 = System runtime in ms.
After reaching 86400000 ms (24 h), the value is reset.
● Index 1 = System runtime in days.
The counter value is saved at switch off. After the drive unit is powered up, the counter
continues to run with the most recently saved value.
Note
Faults and alarms are stamped with this system runtime.
Relative system runtime
The relative system runtime since the last POWER ON is displayed in p0969 (Control Unit)
in ms. The counter runs over after approx. 49 days.
246
Operating Instructions, 05/2016, A5E34382853K
SINAMICS DCP