Parameter Assignment Via The Bop20 (Basic Operator Panel 20); General Information On The Bop20 - Siemens sinamics dcp Operating Instructions Manual

Operation
8.1 Operation
Connector-binector converters
● A 32-bit integer double word or a 16-bit integer word is converted to individual digital
signals.
● p2099[0...1] CI: PROFIdrive PZD selection receive bit-by-bit
Fixed values for interconnection using BICO technology
The following connector outputs are available for interconnecting any fixed value settings:
● p2900[0...n] CO: Fixed value_%_1
● p2901[0...n] CO: Fixed value_%_2
● p2902[0...n] CO: Fixed values_%
Example:
These parameters can be used for test purposes.
8.1.2

Parameter assignment via the BOP20 (Basic Operator Panel 20)

8.1.2.1

General information on the BOP20

With the BOP20, the SINAMICS DCP can be switched on and off for commissioning
purposes and parameters can be displayed and modified. Faults can be diagnosed as well
as acknowledged.
Overview of the displays and keys
Image 8-7
122
Overview of the displays and keys
Operating Instructions, 05/2016, A5E34382853K
SINAMICS DCP