Configuring A Drive Unit - Siemens sinamics dcp Operating Instructions Manual

Commissioning
7.3 Commissioning with the STARTER commissioning tool
7.3.2.4

Configuring a drive unit

Note: STARTER must be offline.
In the project navigator, open the tree element that contains your drive unit.
Image 7-12 Configuring the project navigator drive unit
⇒ In the project navigator, click the plus sign next to the drive unit that you want to configure.
The plus sign changes into a minus sign and the options for configuring the drive unit appear
as a directory tree under the drive unit.
⇒ Double click Configure drive unit
88
Operating Instructions, 05/2016, A5E34382853K
SINAMICS DCP