Meaning Of The Leds - Siemens sinamics dcp Operating Instructions Manual

X1400 EtherNet interface
Table 6- 3 X1400 EtherNet, Ports 1-4
Pin
1
2
3
4
5
6
7
8
Screened back-
shell
Connector type: RJ45 socket
For diagnostic purposes, the ports have one green and one yellow LED (for a description,
see Chapter Meaning of the LEDs (Page 59)).
Cable and connector types
Information on PROFINET cables and connectors can be found in the following catalog:
Industrial Communication
Catalog IK PI
6.5.1.4

Meaning of the LEDs

Table 6- 4 Meaning of the LEDs at ports 1 to 4 of the X1400 interface
LED Color
Link port -
Green
Activity port -
Yellow
SINAMICS DCP
Operating Instructions, 05/2016, A5E34382853K
Signal name
RXP
RXN
TXP
Reserved, do not use
Reserved, do not use
TXN
Reserved, do not use
Reserved, do not use
M_EXT
State
Off Electronics power supply is missing or outside permissible tolerance range (link
missing or defective).
Continuous A different device is connected to port x and a physical connection exists.
light
Off Electronics power supply is missing or outside permissible tolerance range (no
activity).
Flashing light Data is being received or sent at port x.
6.5 Additional system components
Technical specifications
Receive data +
Receive data -
Transmit data +
Transmit data -
Screen, permanently connected
Description
Electrical connection
59