Electrical Connection - Siemens sinamics dcp Operating Instructions Manual

Electrical connection

The devices are operated with hazardous voltages.
All connection work must be carried out while the cabinet is de-energized.
Only qualified personnel who are familiar with all the safety instructions in these Operating
Instructions, as well as the assembly, installation, operating, and maintenance instructions,
should carry out work on these units.
Failure to observe this warning information can result in death, serious injury, or extensive
material damage.
Connecting the unit incorrectly can lead to it being damaged or destroyed.
When handling the unit while it is open, remember that live parts are exposed. The unit
must only be operated with the front covers provided by the factory fitted. When required,
additional covers should be provided in the control cabinet.
This product can cause a direct current in the protective ground conductor. When a residual
current device (RCD) or a residual current monitor (RCM) is used for protection in the event
of direct or indirect contact, only an RCD or RCM of type B is permissible on the power
supply side of this product.
SINAMICS DCP
Operating Instructions, 05/2016, A5E34382853K
WARNING
DANGER
6
35