Supplemental Characteristics - Agilent Technologies 66319B User Manual

A - Specifications

Supplemental Characteristics

Table A-2 lists the supplemental characteristics, which are not warranted but are descriptions of typical
performance determined either by design or type testing.
Parameter
Output Programming Range
Average Programming Resolution
Tracking OVP Accuracy
(refer to page 35 for details)
Average Current Measurement
Resolution
Maximum Current Measurement
Sink Current
Programming Accuracy
Temperature Coefficient
(change/C°)
Readback Accuracy Temperature
Coefficient (change/C°)
2
Drift
Remote Sense Capability
Output Voltage Rise Time
Output Voltage Fall Time
Output Voltage Settling Time
Output 2 OFF time
1
The sink current decreases linearly from 2.8A @ 0 V to 1.2 A @ 15 V. Sink current does not track the programmed current.
2
Following a 30 minute warm-up, the change in output over 8 hours, under constant ambient, load and line conditions.
3
Add 2 mV to the load regulation for each 1 V change in the positive output lead.
4
Add 3 mV to the load regulation for each 1 V change in the negative output lead.
5
To settle within 12 mV of the final value for Output 1.
6
When output 2 is turned off or disabled, the output voltage reduces from 12 V to less than 2 V in under
138
Table A-2. Supplemental Characteristics
Voltage:
Current:
Resistance:
Voltage Limit:
Voltage:
Current:
Resistance:
Above programmed
voltage:
3 A Range:
1 A Range:
0.02A Range:
3 A Range:
1 A Range:
0.02A Range:
Voltage:
Current:
Resistance:
Voltage:
3 A Current (dc):
3 A Current (acdc):
1 A Current range:
0.02A Current range:
Voltage:
Current: +
In each load lead
10% to 90%:
90% to 10%:
5
0 to rated voltage:
rated voltage to 0:
12 V to 2 V:
Agilent 66321B/D;
Agilent 66319B/D
output 1 only
0 – 15.535 V
0 – 3.0712 A
– 40 mΩ to 1 Ω
0 – 22 V
4.2 mV
0.825 mA
1.2 mΩ
2.0V ± 2%
214 µA
32 µA
0.6 µA
7 A
1.05 A
21.5 mA
1
- 2 A @ 7.5 V
0.01% + 0.5 mV
0.01% + 15 µA
0.1% + 0.2 mΩ
0.01% + 300 µV
0.02% + 15 µA
0.05% + 120 µA
0.01% + 10 µA
0.01% + 0.3 µA
0.01% + 1 mV
0.01% + 30 µA
3
up to 4 V
< 200 µs
< 200 µs
0.5 ms
1 ms
NA
Agilent 66319B/D
output 2 only
0 – 12.25 V
0 – 1.52 A
NA
NA
14 mV
1.75 mA
NA
NA
55 µA
NA
NA
1.8A
NA
NA
- 0.03 A @ 7.5 V
0.03% + 1.5 mV
0.03% + 0.4 mA
NA
0.02% + 1.5 mV
0.02% + 0.4 mA
NA
NA
NA
0.03% + 3 mV
0.03% + 0.8 mA
4
up to 4 V
< 200 µs
< 35 ms
NA
NA
< 200 µs
6
200 µs.