Front Panel Annunciators; Immediate Action Keys - Agilent Technologies 66319B User Manual

1 - Quick Reference

Front Panel Annunciators

CV Output 1 or output 2 is operating in constant voltage mode.
CC Output 1 or output 2 is operating in constant current mode.
Unr Output 1 or output 2 is unregulated.
Dis
The output is OFF. Press the Output On/Off key to turn the output on.
OCP The over-current protection state is ON. Press the OCP key to turn over-current
protection off.
Prot Indicates that the output has been disabled by one of the protection features.
Press the Prot Clear key to clear the protection condition.
Cal Calibration mode is ON. Scroll to the Cal Off command and press the Enter key
to exit the calibration mode.
Shift The Shift key has been pressed.
Rmt The remote programming interface is active. Press the Local key to return the
unit to front panel control.
Addr The interface is addressed to talk or listen.
Err There is an error in the SCPI error queue. Press the Error key to view the error
code.
SRQ The interface is requesting service.

Immediate Action Keys

Output
Toggles the output of the selected output between the ON and OFF states.
On/Off
When coupled, turns both output channels ON or OFF.
Activates front panel control when the unit is in remote mode (unless a Lockout
Local
command is in effect).
Shift Prot Clr
Resets the protection circuit and allows the unit to return to its last programmed
state.
Shift
OCP
A toggle switch that enables or disables overcurrent protection.
12