Supplemental Characteristics - Agilent Technologies 66311A User Manual

Table of Contents

Advertisement

A - Specifications

Supplemental Characteristics

Table A-2 lists the supplemental characteristics, which are not warranted but are descriptions of typical
performance determined either by design or type testing.
Parameter
Input Rating:
(at full load from 47 – 63 Hz)
Output Programming Range
Average Programming Resolution
OVP Accuracy
Maximum Current Measurement
Average Current Measurement
Resolution
Sink Current
Programming Accuracy Temperature
Coefficient (change/C°)
Readback Accuracy Temperature
Coefficient (change/C°)
Drift
2
Output Voltage Rise/Fall Time
(for a change from 10% to 90% or
90% to 10% of the total excursion)
Output Voltage Settling Time
(to settle within 1 LSB or 0.025% times
the rated voltage of the final value)
Dynamic Measurement Accuracy
Dynamic Measurement System
1
The sink current decreases linearly from 2.8A @ 0 V to 1.2 A @ 15 V. The sink current does not track the programmed current.
2
Following a 30 minute warm-up, the change in output over 8 hours, under constant ambient, load and line operating conditions.
3
For full scale current changes with a risetime of 20 µs, an additional 0.5% error exists in the first data point in the buffer after
the change. The error percentage increases proportionally with the decrease in risetime.
120
Table A-2. Supplemental Characteristics
100 Vac mains (87-106 Vac):
115 Vac mains (104-127 Vac):
220 Vac mains (191-233 Vac):
230 Vac mains (207-253 Vac):
Current (ACDC): 0.05% +
Current (Low Range): 0.01% +
Voltage:
Current:
OVP:
Voltage:
Current:
OVP:
2.4 % +
Hight Range:
Low Range:
Voltage: 0.01% +
Current: 0.01% +
OVP: 0.015% +
Voltage: 0.01% +
Current (DC): 0.02% +
Voltage: 0.01% +
Current: 0.01% +
Instantaneous Voltage:
Instantaneous Current:
Buffer Length:
Sampling Rate Range:
HP 66311A
1.6 A, 100 W
1.4 A, 100 W
0.8 A, 100 W
0.75A, 100 W
0 – 15.535 V
0 – 3.0712 A
22 V
3.75 mV
0.67 mA
100 mV
240 mV
7 A
213 µA
0.6 µA
1
- 2 A @ 7.5 V
0.5 mV
15 µA
4 mV
300 µV
15 µA
120 µA
0.3 µA
1 mV
30 µA
< 200 µs
2 ms
0.03% + 5 mV
3
0.6% + 2 mA
4096 points
15.6µs−31,200s

Advertisement

Table of Contents
loading

Table of Contents