Agilent Technologies 66319B User Manual page 140

A - Specifications
Parameter
Calibration Interval
Regulatory Compliance
Dimensions
(see figure 3-1)
Net weight
Shipping weight
Table A-3. Agilent 66321D/66319D DVM Specifications and Characteristics
Performance Specifications (warranted from 0 to 55 °C unless otherwise noted)
DC Readback Accuracy (@ 25°C ±5°C)
AC+DC rms Readback Accuracy
(@ 25°C ±5°C with dc plus a sinewave input > 25mV rms)
Common Mode Voltage Range (from either DVM input with
respect to the negative output terminal of Output 1)
Maximum DC Differential Voltage
Maximum AC Differential Voltage (with a sinewave input)
Maximum Continuous Input Capability without damage
(between input terminals or from either input to chassis ground)
Input Resistance (from either DVM input with respect to
either output terminal of Output 1)
Input Capacitance (on either input terminal)
DC Common Mode Rejection Ratio
Voltage Readback Resolution
Readback Temperature Coefficient (change per °C)
1
+15 mV for dc plus sinewave input < 25 mV rms.
2
To accept 10 Vrms sinewave input, the common mode voltage with respect to the negative terminal of output 1 must be
10 Vdc. This is required to "center" the DVM in its common mode range.
Table A-4. Agilent 66319B/D Option 521 Characteristics
Output Impedance
(Output = OFF)
Solid State Relay Current rise time
(from 10% to 90% of the total output change)
Solid State Relay Current fall time
(from 10% to 90% of the total output change)
140
Table A-2. Supplemental Characteristics (continued)
from the date the unit is put into service
Supplemental Characteristics
1 year (recommended)
Listing pending:
Certified to: CSA 22.2 No. 1010.1
Conforms to: IEC 1010-1, EN 61010-1
Complies with: EMC directive 89/336/EEC (ISM
Height:
Width:
Depth: 435 mm (17.125 in.)
60 Hz to 10 kHz:
45-60 Hz and 10-20 kHz:
Front panel:
GPIB:
Output 1:
Ouptut 2:
Relay mode =Hot
Relay mode =Hot
All Models
UL 3111-1
Group1 Class B)
88.1 mm (3.5in.)
212.8 mm (8.4in.)
9.07 kg (20 lbs.)
11.1 kg (24.5 lbs.)
0.04% +5 mV
1
1% +5 mV
1
4 % +5 mV
− 4.5 Vpk to + 25
Vpk
± 25 V peak
2
10 V rms
50 V
20 MΩ
< 60 pF
> 83 dB
1 mV
< 0.2 mV
0.002% + 0.2 mV
500k ohms
200k ohms
100 microseconds
50 microseconds