Agilent Technologies 66319B User Manual page 180

Manual Updates
The following updates have been made to this manual since its publication.
1/10/01
The 14565 Remote Front Panel has been removed from Table 2-2.
The Maximum current range parameter has been changed from "Max" to "3A" throughout the manual.
Performance testing information has been added to Appendix B.
10/03/01
The Current Sink and Resistance Tests performance procedures have been corrected in Appendix B.
4/22/02
Mains Input Ratings have been corrected in Table A-2. Figure E-1 has been corrected in Appendix E.
5/02/03
Information about the external measurement trigger input has been added to all chapters. This capability
is only available on units with firmware revisions A.03.01 and up.
Corrections have also been made to the test record cards in Appendix B for ISO 17025.
2/9/05
The Declaration Page is updated. Further corrections have been made to Appendix B for ISO 17025.
8/2/06
The resistance calibration procedure has been corrected on page 157. Part numbers corrected on page 142.
9/18/08
All references to the RS-232 connector and the Agilent 14575A remote front panel have been removed
from this manual. The RS-232 connector and its functionality were removed from the Agilent 66311B/D
models starting March, 2008.
5/20/09
A URL has been added to the declarations page to obtain the latest declaration of conformity.
Corrections have been made to Figure 3-10.
The RF field annotation note has been removed from Table A-1.
Information about resetting the calibration password has been added to Appendix B.