Toyota 2007 Tundra Owner's Manual page 82

Hide thumbs Also See for 2007 Tundra:

Table of Contents

2. Remove the circuit board, then remove

the discharged transmitter battery.

z Take care not to damage the circuit

z Do not bend the terminals.

3. Put in a new transmitter battery with

positive (+) side up. Install the circuit

board into the transmitter case.

Close the transmitter case securely.

z Make sure the positive side and

negative side of the transmitter bat-

tery are faced correctly.

z Do not replace the battery with wet

hands. Water may cause unexpected

2007 TUNDRA from Jul. '07 Prod. (OM34463U)

z Do not touch or move any compo-

nents inside the transmitter, or it

may interfere with proper operation.

z Be careful not to bend the electrode

when inserting the transmitter bat-

tery and that dust or oils do not

adhere to the transmitter case.

z Close the transmitter case securely.

After replacing the battery, check that the

transmitter operates properly. If the trans-

mitter still does not operate properly, con-

tact your Toyota dealer.

Show Quick Links

Table of Contents