Turn The Jack Joint By Hand; To Remove The Temporary Spare Tire - Toyota 2007 Tundra Owner's Manual

Hide thumbs Also See for 2007 Tundra:

Table of Contents

Turn the jack joint by hand.

To remove: Turn the joint in direction

1 until the jack is free.

To store: Turn the joint in direction 2

until the jack is firmly secured to pre-

vent it flying forward during a collision

or sudden braking.

1. Put a jack handle extension and

jack handle end together as shown

in the illustration.

1 Jack handle extension No.1

2 Jack handle extension No.2

3 Wheel nut wrench

Make sure they are each securely

2007 TUNDRA from Jul. '07 Prod. (OM34463U)

2. Insert the end of the jack handle

extension No.1 into the lowering

screw and turn it counterclock-

3. After the tire is lowered completely

to the ground, remove the holding

When storing the temporary spare

tire, put it in place with the outer side

of the wheel facing up. Then secure

the tire, taking care that the tire goes

straight up without catching on any

other part, to prevent it from flying for-

ward during a collision or sudden

Show Quick Links

Table of Contents