Toyota 2007 Tundra Owner's Manual page 289

07 04.26
However, if the selector lever is shifted
to the "S" position when AI shifting
control is being performed, the initial
shift range position may be "2" (second
range) or "3" (third range). This is be-
cause the suitable shift range is se-
lected depending on the driving condi-
tion.
The "S" mode indicator light and the cur-
rent shift range position are shown on the
instrument cluster.
XS17027
1: Upshift range
2: Downshift range
2007 TUNDRA from Jul. '07 Prod. (OM34463U)
Shift range positions
D
"6" (Sixth range):
The most suitable gear is selected au-
tomatically between first and overdrive
(sixth) gears according to the vehicle
speed and driving conditions.
D
"5" (Fifth range):
The most suitable gear is selected au-
tomatically between first and fifth gears
according to vehicle speed and driving
conditions. This range is suitable for
acceleration such as when you want to
pass a vehicle running ahead of you
during high speed driving.
D
"4" (Fourth range):
The most suitable gear is selected au-
tomatically between first and
gears according to the vehicle speed
and driving conditions. Slight engine
braking will be obtained on a downhill
road. Smooth running with less shifting
will be obtained on an uphill road.
D
"3" (Third range):
The most suitable gear is selected au-
tomatically between first and
gears according to the vehicle speed
and driving conditions. This range is to
be used when stronger engine braking
is necessary.
fourth
third
233