Programming The Homelink - Toyota 2007 Tundra Owner's Manual

07 04.26
(a) Programming the HomeLink
R
The HomeLink in your vehicle has 3
buttons and you can store one program
for each button.
To ensure correct programming into the
R
HomeLink , install a new battery in the
hand−held transmitter prior to program-
ming.
The battery side of the hand−held trans-
mitter must be pointed away from the
R
HomeLink during the programming pro-
cess.
For Canadian users, follow the procedure
in "Programming an
gate/Programming all devices
Canadian market".
R
1. Decide which of 3 HomeLink
you want to program.
R
XS10012
Hand−held
garage
transmitter
2. Place your hand−held garage transmit-
entrance
ter 25 to 75 mm (1 to 3 in.) away from
in the
the surface of the HomeLink
Keep the indicator light on the HomeLink
buttons
in view while programming.
R
HomeLink
XS10013
25 to
75 mm
(1 to
3 in.)
3. Simultaneously
hand−held garage
R
. along with the selected HomeLink
ton.
R
Do not release the buttons until step 4
has been completed.
4. When the indicator
R
HomeLink changes from a slow to a
rapid flash after 20 seconds, you can
release both buttons.
2007 TUNDRA from Jul. '07 Prod. (OM34463U)
press and hold the
transmitter button
R
but-
light on the
417