Torque Specification - Toyota 2007 Tundra Owner's Manual

07 04.26
D Have the wheel nuts tightened
with a torque wrench to the fol-
lowing torques, as soon as
possible after changing
wheels. Retighten the wheel
nuts within 160 km (100 miles)
of driving. Otherwise, the nuts
may loosen and the wheels
may fall off, which could cause
a serious accident.
Due to the higher torque
specification for these wheel
nuts, if in doubt about the
correct tightness, have them
checked by your Toyota deal-
er or at a service station.
Taper type
(Steel wheels)
XS40047
Flat washer type
(Aluminum wheels)
2007 TUNDRA from Jul. '07 Prod. (OM34463U)

Torque specification:

Taper type (Steel wheels)—
209 N·m (21.3 kgf·m, 154 ft·lbf)
Flat washer type
(Aluminum wheels)—
131 N·m (13.4 kgf·m, 97 ft·lbf)
∗
: When temporarily used on spare
tire/wheel, apply 209 N·m (21.3
kgf·m, 154 ft·lbf)
∗
509