Recalling The Memorized Position - Toyota 2007 Tundra Owner's Manual

07 04.26
To make only slight changes to an already
memorized position, the easiest way is to
first activate the memorized position, then
make the desired changes and perform
step 2 above.
XS13099a

RECALLING THE MEMORIZED POSITION

When you push button "1" or "2", a
beep will sound and the driving posi-
tion will be automatically adjusted to
the position recorded for that button.
The memorized position can be recalled
under the following conditions:
D
The ignition switch is in the "ON" posi-
tion and the selector lever is in the "P"
position.
D
The key is not in the ignition switch
and less than 30 seconds have passed
since opening the driver's door.
To stop the operation, push any driving
position memory button.
2007 TUNDRA from Jul. '07 Prod. (OM34463U)
To reactivate the system, push the button
"1" or "2" again.
If the vehicle's battery is disconnected,
the memory will be erased and the posi-
tions will have to be set again.
CAUTION
D
Do not start the vehicle while the
adjustment are being made.
D
Take care not to select the wrong
button, or the seat could strike the
rear passenger or hit your body
against the steering wheel. If this
happens, you can stop the move-
ment by pressing another driving
position memory switch, or
pressing the brake pedal.
de-
57