Toyota 2007 Tundra Owner's Manual page 202

07 04.26
XS13202
4. Replace the head restraint.
5. If two child seats will be installed,
use the outboard seating positions.
146
—Installation with child
restraint lower anchorages
(Regular cab models)
XS13091
Lower anchorages for the child restraint
systems complying with the FMVSS225
or CMVSS210.2 specifications
installed in the front seat.
The anchorages are installed in the gap
between the seat cushion and seatback of
the right side of the seat as shown in the
illustration.
Child restraint systems complying with the
FMVSS213 or CMVSS213 specification
can be fixed to these anchorages. In this
case, it is not necessary to fix the child
restraint system with a seat belt on the
vehicle.
2007 TUNDRA from Jul. '07 Prod. (OM34463U)
XS13143
12th lock
position
CHILD RESTRAINT
INSTALLATION
are
1. Fold down the seatback and back to
the 1st lock position until it locks
into place. Adjust the seatback to
the 12th lock position.
Make sure the seatback is locked secure-
ly.
1st lock
position
SYSTEM