Changing Wheels; Reinstalling Wheel Nuts - Toyota 2007 Tundra Owner's Manual

Hide thumbs Also See for 2007 Tundra:

Table of Contents

—Changing wheels

7. Remove the wheel nuts and

change tires.

Lift the flat tire straight off and put it

Roll the spare wheel into position and

align the holes in the wheel with the

bolts. Then lift up the wheel and get

at least the top bolt started through

its hole. Wiggle the tire and press it

back over the other bolts.

Before putting on wheels, remove any

corrosion on the mounting surfaces

with a wire brush or such. Installation

of wheels without good metal−to−met-

al contact at the mounting surface can

cause wheel nuts to loosen and

eventually cause a wheel to come off

while driving.

2007 TUNDRA from Jul. '07 Prod. (OM34463U)

8. Reinstall all the wheel nuts fin-

Reinstall the wheel nuts (tapered end

inward) and tighten them as much as

you can by hand. Press back on the

tire back and see if you can tighten

Show Quick Links

Table of Contents