Before Using The Accessory Meter; Outside Temperature Display; Selecting Unit - Toyota 2007 Tundra Owner's Manual

07 04.26
—Before using the accessory
meter
Operate the accessory meter with the
ignition switch on.
When the ignition switch is turned to
"ON", the last previously used mode dis-
played just before the ignition switch is
turned off will appear.
When the instrument panel lights
turned on, the brightness of the display
will be reduced.
CAUTION
Do not adjust the display while the
vehicle is moving. Be sure to adjust
the display only when the vehicle is
stopped.

SELECTING UNIT

You can select the unit between En-
glish/U.S. customary system and metric
unit.
To select the unit A (English/U.S. custom-
ary system) or unit B (metric unit), push
are "SETUP US/M" button.
The unit variations are as follows:
Information Unit A
Average fuel
consumption and
MPG
Instantaneous
fuel consumption
Driving range MILES
Outside
_F
temperature

—Outside temperature display

(without cruise information)
XS10003b
Unit B
L/100 km
The displayed temperature ranges from
−40_C (−40_F) up to 50_C (122_F).
km
The ignition switch must be in the "ON"
position.
_C
If an abnormality exists in the connection
of the outside air temperature sensor,
"−−−_C" ("−−−_F") will appear on the dis-
play. If "−−−_C" ("−−−_F") appears on the
display, contact your Toyota dealer.
There may be a
("−−−_F") appears momentarily when the
ignition switch is quickly turned to "ON".
It is normal if it goes out soon.
2007 TUNDRA from Jul. '07 Prod. (OM34463U)
case that "−−−_C"
399