Normal Display; Zoom Display - Toyota 2007 Tundra Owner's Manual

07 04.26
—Odometer and two trip
meters
XS16013d

Normal display

XS16014c

Zoom display

192
This meter displays the odometer and
two trip meters.
Selecting the zoom display
odometer and trip meter when
cruise information is displayed causes
the odometer and one of the trip me-
ters to be displayed simultaneously.
1. Odometer—Shows the total distance
the vehicle has been driven.
2. Two trip meters—Show two different
distances independently driven since
the last time each trip meter was set
to zero.
You can use one trip meter to calculate
the fuel economy and the other to
measure the distance on each trip. All
trip meter data is cancelled if the elec-
trical power source is disconnected.
3. Trip meter reset knob—Resets the two
trip meters to zero, and also changes
the meter display.
To change the meter display, quickly
push and release the knob. The meter
display changes in the order from the
odometer to trip meter A to trip meter
B, then back to the odometer each
time you push.
2007 TUNDRA from Jul. '07 Prod. (OM34463U)
To reset the trip meter A to zero, dis-
play the meter A reading, then push
and hold the knob until the meter is
of the
set to zero. The same process can be
the
applied for resetting the trip meter B.