Raising Rear Seat Cushion; Before Raising Rear Seat Cushion; Seat Position Adjusting Levers - Toyota 2007 Tundra Owner's Manual

Hide thumbs Also See for 2007 Tundra:
Table of Contents

Advertisement

07 04.26

1. SEAT POSITION ADJUSTING LEVERS

Hold the center of the lever and pull it
up. Then slide the seat to the desired
position with slight body pressure and
release the lever.
2. SEATBACK
ANGLE
ADJUSTING
LEVERS
Pull the lever up. Then lean back to the
desired angle and release the lever.
CAUTION
D
Do not adjust the seat while the
vehicle is moving.
D
Be careful that the seat does not
hit a passenger or luggage.
D
Avoid reclining the seatback any
more than needed. The seat belts
provide maximum protection in a
frontal or rear collision when the
passengers are sitting up straight
and well back in the seats. If you
are reclined, the lap belt may slide
past your hips and apply restraint
forces directly to the abdomen or
your neck may contact the shoulder
belt. In the event of a frontal colli-
sion, the more the seat is reclined,
the greater the risk of death or se-
rious injury.
D
After adjusting the seat position, re-
lease the lever and try sliding the
seat forward and backward to make
sure it is locked in position.
D
After adjusting the seatback, push
your body back against the seat to
make sure the seat is locked in
position.
NOTICE
Do not fold the rear seat seatback
forward with the luggage cover hooks
attached.
2007 TUNDRA from Jul. '07 Prod. (OM34463U)

—Raising rear seat cushion

(Double cab models)
XS13146b

BEFORE RAISING REAR SEAT CUSHION

1. Stow the rear seat belt buckles as
shown in the illustration.
This prevents the seat belt buckles from
falling out when you fold the seatback.
NOTICE
The seat belt and buckles must be
stowed
before
you
raise
the
seats cushion.
rear
59

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents