Toyota 2007 Tundra Owner's Manual page 108

Hide thumbs Also See for 2007 Tundra:

Table of Contents

Bench seats (Double cab and Crew Max

Hold the center of the lever and pull

it up. Then slide the seat to the de-

sired position with slight body pres-

sure and release the lever.

2. SIDE SEATBACK ANGLE ADJUSTING

Lean forward and pull the lever up.

Then lean back to the desired angle

and release the lever.

ADJUSTING LEVER

Pull the lever up. Then lean back to

the desired angle and release the

ADJUSTING KNOB

To change the angle of the seat

cushion on the front side, turn the

knob either way.

5. DRIVER'S SEAT HEIGHT ADJUSTING

To change the height of the seat,

pull up or push down the lever.

2007 TUNDRA from Jul. '07 Prod. (OM34463U)

more than needed. The seat belts pro-

vide maximum protection in a frontal

or rear collision when the driver and

the front passenger are sitting up

straight and well back in the seats. If

you are reclined, the lap belt may

slide past your hips and apply re-

straint forces directly to the abdomen

or your neck may contact the shoul-

der belt. In the event of a frontal

collision, the more the seat is re-

clined, the greater the risk of death

or personal injury.

Show Quick Links

Table of Contents