Air Flow Selector Settings; Operating Tips - Toyota 2007 Tundra Owner's Manual

07 04.26

—Air flow selector settings

∗ 2
XS19021
∗ 2
1
∗
∗ 2
∗ 1
:driver side :passenger side
382
∗ 2
∗ 1
∗ 1
∗ 1
∗ 1
: Double cab and Crew Max models
∗ 2
: Crew Max models

—Operating tips

D
To cool off your Toyota after it has
been parked in the hot sun, drive with
the windows open long enough for the
hot air to escape. This operation allows
the air conditioning to cool the interior
more quickly.
D
Make sure the air intake grilles in front
of the windshield are not blocked (by
leaves or snow, for example).
D
On humid days, do not blow cold air
on the windshield. The windshield could
∗ 1
fog up because of the difference in air
temperature on the inside and outside
of the windshield.
D
Keep the area under the front seats
clear to allow air to circulate through-
out the vehicle.
D
On cold days, set the fan speed to
high for a minute to help clear the
intake ducts of snow or moisture. This
can reduce the amount of fogging on
the windows.
D
When driving on dusty roads, close all
windows. If dust thrown up by the ve-
hicle is still drawn into the vehicle after
closing the windows, it is recommended
that the air intake selector be set to
FRESH and the fan speed selector to
any setting except "OFF".
2007 TUNDRA from Jul. '07 Prod. (OM34463U)