Air Intake Selector; Floor/Windshield; Windshield - Toyota 2007 Tundra Owner's Manual

07 04.26
4. Floor/Windshield—Air flows
from the floor vents and windshield
vents.
Turning the air flow selector to the
floor/windshield position turns on the
defogging/defrosting function with the
purpose of clearing the windshield.
In this position, air intake selector
mode changes to FRESH automatically
to clear the windshield quickly. If you
want to return the setting to RECIRCU-
LATE mode, press the air intake selec-
tor button once again.
Press the "A/C" button for dehumidified
heating or cooling. This setting clears
the windshield more quickly.
5. Windshield—Air flows mainly from the
windshield vents.
Turning the air flow selector to the
windshield position turns on the defog-
ging/defrosting function and the air con-
ditioning with the purpose of clearing
the windshield.
In this position, air intake selector
mode changes to FRESH automatically
to clear the windshield quickly. It is not
possible to return to RECIRCULATE in
this position.
380
mainly In this position, the air conditioning
turns on regardless of the "A/C button
indicator comes on or goes off. This is
not a malfunction.
For details about air flow selector settings,
see "Air flow selector settings" described
below.
XS19014

Air intake selector

Press the button to select the air source.
1. Recirculate (indicator light is on)—Re-
circulates the air inside the vehicle.
2. Fresh (indicator light is off)—Draws
outside air into the system.
To prevent fogging up of the windshield,
the air intake mode may change automati-
cally to FRESH depending on the condi-
tion of the air conditioning system.
2007 TUNDRA from Jul. '07 Prod. (OM34463U)