Power Rear View Mirror Control; To Adjust A Mirror - Toyota 2007 Tundra Owner's Manual

07 04.26
CAUTION
D
Do not adjust the mirror while the
vehicle is moving. Doing so may
cause the driver to mishandle the
vehicle and an accident may occur
resulting in death or serious inju-
ries.
D
On some models, since the mirror
surfaces can get hot, do not touch
them when the defogger switch is
on.
—Power rear view mirror
control
XS14006a
Type A
XS14007a
Type B
To adjust a mirror, use the switches.
1. Master switch—To select the mirror to
be adjusted
Push the switch to "L" (left) or "R"
(right).
2. Control switch—To move the mirror
Push the switch in the desired direc-
tion.
Mirrors can be adjusted when the ignition
switch is in the "ACC" or "ON" position.
Vehicles with the driving position memory
system—The position of the outside rear
view mirrors and driver's seat can be
memorized. For details,
position memory system" on page 56 in
Section 1−3.
NOTICE
If ice should jam the mirror, do not
operate the control or scrape the mir-
ror face. Use a spray de−icer to free
the mirror.
2007 TUNDRA from Jul. '07 Prod. (OM34463U)
see "Driving
157